Blink (闪光) Experiments (实验)
After completing the Blink project, test yourself by trying these experiments.
1 | Modify (修改) the code (代码) so that it will turn the LED on for 2 seconds, and then turn the LED off for 1/2 a second. | |
Remember to press the Upload button to upload and run the program on the Arduino board after each time you make any modifications (修改) to your program. | ||
2 | Modify the code so that the LED blinks like your heart beat. | |
3 | Make a Morse code (摩尔斯电码) sender to send out (发出) the emergency Morse code dot-dot-dot (点 - 点 - 点) dash-dash-dash dot-dot-dot for SOS.
| |